Skip to main content

Kelvin: Selection

How to select, upload, and transfer images in Kelvin.

Kelvin takes you from shot to delivered with a few drags and a click. Choose your best captures, drop them into the right Style Guide position, and watch each requirement turn green as you complete it. When the set is ready, hit Transfer to send your selects straight to the next step in production.


Introduction

The first step to mapping and selecting your assets in Kelvin requires an activated item in your shot list. For more information on scanning or selecting products in the shot list, please see our article by following the link below.

Selection Mode

Once you have a production selected, the far right column of the screen will change depending on the selection type that has been assigned in the product's Workflow.

Selection Mode

Description

Generic Pre-Selection

Photographers drag all their chosen images into a single transfer bucket without assigning them to positions, and can open the Style Guide for reference. The final selection and position mapping happen later in Gamma.

Pre-Selection

by Position

Kelvin shows the Style Guide positions and how many shots each one will need, and photographers drag a range of candidate images into each position. This gives the team a shortlist for each position, and the final pick is made later in Gamma.

Pre-Selection + Final Selection

Photographers make the final selection on set by dragging their chosen images into each Style Guide position, with extra options going into each position's "Alts" bucket.

Selection Header

Regardless of the selection type, information will be visible above the selection bucket to help you navigate the capture process.

Component

Description

Style Guide

Shows the name of the currently associated Style Guide; copy the name to search in the Style Guide tab.

Trigger Rescan

Removes the currently selected/scanned product and allows you to reselect or scan a new product/sample.

Reference Alert

The eye next to the Product Code alerts you that this production has relevant references in the reference tab.

Sample Selection

Shows the sample when selected; otherwise, allows you to open a menu to choose the sample on set.

Outfit Menu

Open a menu that allows you to view or make changes to an associated Outfit if one has been created.

Production Type

Shows the scanned product's current production type when working in a mixed production session.

Position Lanes

The style guide positions will be displayed as lanes, with information displayed about the requirements to complete the shot. The requirements are displayed in the format:

minimum | maximum | strictness

#

Numeric Symbol

The minimum or maximum number of assets allowed.

∞

Infinity Icon

When the maximum is unlimited/uncapped.

'!'

Mandatory

The position is mandatory. In order to transfer the task, assets must be assigned, and requirements met.

No '!'

Optional

The position is optional; assets do not need to be assigned to transfer the task as a whole.

✓

Requirement Met

The assets for the position meet the requirements, and the position is ready to transfer.

As you add images to the position lanes, you'll see a green tick replace the exclamation mark once its requirements are met.

Mapping Selects

Assets can be assigned from the asset grid to the selection buckets in a number of ways depending on the selections you want to make.

Method

Shortcut

Function

Manual Select

Mouse Click + Drag & Drop

Select an asset in the grid and drag it into the desired position lane.

Select Range

Shift + Mouse Click → Shift + Mouse Click

Shift + Select the first asset of the range → Shift + Select the last asset of the range– then drag as a group.

Select All

Ctrl/Cmd + A

Selects all assets in the current watch folder (up to 1,000).

Transfer All

'Transfer All' Button

When working with pre-selection and editorial lanes, you can also use the 'Transfer All' option to perform Select All + Transfer at once.

Position Assign

Ctrl/Cmd + Number

With an asset selected, assign images to the Style Guide position as the numbered lane: 1 - N, top to bottom.

Alt Assign

Ctrl/Cmd + Number + Right Arrow Key

With an asset selected, assign images to the 'Alts' position as the numbered lane: 1 - 9, top to bottom.

🗣️ The maximum limit for assets in a position for non-editorial productions is 99, and therefore Select All /Transfer All will only associate the maximum number of files for the given selection, and warn what's excluded.

Transfer

Shoot the Product Request, ensuring you have captured images for each of the required positions. Once all mandatory positions have been fulfilled, the 'Transfer button will appear and turn blue; select it to upload the assets to Creative Force and complete the task.

To check on the progress of your transferred task, or take further action on it, head to the Transfer Tab and review it by first selecting it in the transfer list.

Mark for Instructions

To send instructions to Post-Production, check the 'Radio button' at the bottom corner of the product information header. The option to mark for instructions will only be available if the task's Workflow contains post-production steps.

You will then move to the 'Mark up' page where you can add instructions and markings to the images. On the left, you can find all the tools to make your markings.

💭 To learn more about the markup and instructions screen and its available tools/functionality, see our dedicated article on the subject here.

Did this answer your question?